|
|
 |
With the quality of our drinking water increasingly coming into question, people
are now looking for alternative sources of quality water. Hydrotech® Reverse
Osmosis Drinking Water Systems provide the most convenient and economical solution.
Neatly stored under the counter, Hydrotech® provides you with clean and delicious
water right from its own dedicated tap. All Hydrotech® Reverse Osmosis Systems
include 3/8” outlet tubing to the faucet for higher flows, quick connect
fittings and color-coded tubing for easy installation and servicing. All systems
are backed by a two-year limited warranty. The Smartap® water quality monitor
found on the Push Button designated model is backed by a five-year limited warranty.
Hydrotech is one of North America’s largest suppliers of water treatment
equipment. For more than two decades, Hydrotech has been the leader in reverse
osmosis water treatment technology, designing and manufacturing state-of-the-art
systems for residential and commercial applications.
Models 4VTFC9G, 25G, 50G, 75G
High Quality Four-Stage Systems
The 4VTFC9G, 4VTFC25G, 4VTFC50G and 4VTFC75G Hydrotech Reverse Osmosis Drinking
Water Systems combine mechanical filtration with reverse osmosis technology
for effective water treatment in point-of-use applications. In addition, these
models include standard features such as a Thin Film Composite (TFC) membrane,
sediment filter, automatic shutoff, chrome air gap faucet and a metal storage
tank. |
| 124 Series Model Summery |
|
Model |
Part # |
Stages |
GPD |
Faucet |
SmarTap® |
| 3VTFC25G |
1240101-00 |
3 |
25 |
Air gap |
No |
| 3VTFC50G |
1240102-00 |
3 |
50 |
Air gap |
No |
| 4VTFC9G |
1240200-00 |
4 |
9 |
Air gap |
No |
| 4VTFC25G |
1240201-00 |
4 |
25 |
Air gap |
No |
| 4VTFC50G |
1240202-00 |
4 |
50 |
Air gap |
No |
| 4VTFC75G |
1240203-00 |
4 |
75 |
Air gap |
No |
| 4VTFC9GPB |
1240300-00 |
4 |
9 |
Air gap |
Yes |
| 4VTFC25GPB |
1240301-00 |
4 |
25 |
Air gap |
Yes |
| 4VTFC50GPB |
1240302-00 |
4 |
50 |
Air gap |
Yes |
| 4VTFC75GPB |
1240303-00 |
4 |
75 |
Air gap |
Yes |
The model displayed on this page is highlighted in blue
|
Conditions for Use |
|
Water Supply |
Parameter |
| Municipal or Private |
Chlorinated or Non-Chlorinated |
| Feed Water Pressure |
50 - 100 Psi |
| Temperature |
40 - 100°F |
| pH |
3.0 - 11.0 |
| Maximum TDS Level |
2000 mg/L |
| Turbidity |
<1.0 NTU |
| Hardness |
<350 mg/L (20 grains per gallon) |
| Iron |
<1.0 mg/L |
| Manganese |
<0.05 mg/L |
| Hydrogen Sulfide |
0.00 mg/L |
| Residual Chlorine |
<2.0 mg/L |
| A pressure regulator is recommended for feed
water pressures exceeding 80 psi. The performance of a reverse osmosis membrane
is highly dependent upon pressure, temperature, and water chemistry. The
actual volume of product water and rejection percentage will vary with differences
from the test conditions upon which the membrane ratings are based. These
drinking water systems are not intended to be used for the treatment of
water that is microbiologically unsafe or of unknown quality. Storage tank
capacity is dependent pressure. |
|
Hydrotech reverse osmosis unit installed in a residential apartment.
Rollover mouse for larger image.
|
Package includes the RO unit, first set of cartridges, 4 gallon metal holding
tank, chrome long reach air gap faucet, self-piercing saddle valve, drain saddle
valve, installation manual, and all tubing and mounting hardware necessary for
a standard under sink installation.
|
Filtration
